This electrical appliance is rated for 220-240V 50-60Hz use only

Ideal for heating 100g roller depilatory wax cartridges. 

Temperature can be adjusted between 0-80°C

Power: 80W

Voltage: 220V 50Hz

Directions of use:

1. Insert wax refills into roller holders and switch on the mains supply.
2. Leave the wax to heat for approximately 20-30minutes and then proceed with hair removal.
3. Make sure skin is perfectly clean and dry. Do not carry out hair removal on irritated or particularly sensitive skin or in presence of spots, injuries, burns or other skin               problems.
4. Roll on the product in the direction of hair growth and apply it to cover an area of approx 15-18cm. Before beginning the application, make sure that the wax has reached the correct temperature. If the wax is too hot, suspend the application.
5. Apply a paper strip to the area to the area being treated. Press the strip well onto the skin by applying pressure with the palm of the hand.
6. Remove the paper strip in the opposite direction to that of the hair growth by pulling it away sharply and parallel to the are being treated.
7. Keep the skin taut while pulling away the strip. Do not pull the strip upwards from the skin. The strip may be used several times.
8. After hair removal, clean the area with after wax cleansing oil.
9. After cleaning, massage with fragrance free moisturiser.

Note:

• Do not use on sensitive skin or skins that have bruises, rankles, turgid, whelks or other problems.
• Stay out of sunlight and away from UVA rays in the 24 hour period following hair removal.